DD5LP/P – March 13th 2019 – DL/AM-180 Berndorfer Buchet, DL/AM-001 Peissenberg & DL/AM-060 Laber – a tale of sudden storms.

Preparation:

Brian VK3BCM from Australia was visiting Munich and I offered to take him to a summit or two while he was over. We played with several possible higher scoring summits only to find some of them had closed their lifts for maintenance a couple of weeks or in one case one day before Brian and his wife arrived in Munich.

The main point (apart from picking up activator points and winter bonus points of course) was to get at least one DL summit qualified so that Brian has another association for his Mountain Explorer award.

The week before Brian arrived the weather turned from being relatively pleasant with the old snow melted, back to winter with new snow coming down and covering everything in just over an hour but much worse we got multiple days of hurricane force winds with sleet and rain.

For this reason I decided we should take a very simple summit first to complete the Mountain Explorer requirement, then go on to some more interesting summits. As Brian was based in the centre of Munich, we arranged that he would get a train to the town of Tutzing on Starnberger Sea (about half way to the closer summits) and I would pick him up from there and take him to the nearby Berndorfer Buchet summit. Once that was completed we’d go to the drive-up Peissenberg summit, where we would also get lunch at the convenient restaurant and then go on to Laber as the higher scoring summit with some great views

Little did we know what the weather was going to deliver to us!

In any case, as I wasn’t sure what Brian would be bringing, I packed several different antennas and mast configurations including the SOTABeams linked dipole, the Aerial-51 OCF dipole, two VP2E antennas and the Kommunica Power HF-Pro2 loaded vertical. As supports I had the small tripod for the Kommunica antenna, the big surveyors tripod to support the telescopic masts and the screw-in sun umbrella base “just in case”. For masts I took two Lambdahalbe 6m masts and my DX-Wire 10m portable mast.

All was packed into the car, the night before (actually in some cases re-packed as I did two activations on the 12th). This as it turned out was a good idea to prepare the night before ….

The Activation (Berndorfer Buchet):

As I was still eating my breakfast, Brian called – he was already on the train heading to Tutzing and would be there in 22 minutes! There had been a misunderstanding as I had expected Brian to take a later train and I had a good 40 minutes drive across to Tutzing. In any case this gave us a good start to the day and we were at the parking spot for Berndorfer Buchet after collecting Brian from the station, almost an hour earlier than I had planned.

Berndorfer Buchet is an easy one-pointer summit with a 10 minute forest walk in from the car parking area and a steep climb up to the actual summit, which as you’ll see from the photos, is fully forested. We arrived on the summit at about 0900 UTC and I wanted to show Brian the trig point stone on the summit but couldn’t find it under the layers of branches and leaves that had come down during the winter.

Both Brian and I had full kits of gear with us but rather than set up two stations close to each other, we agreed to share equipment and so I put up the surveyors tripod which acted as a support for Brian’s 6 metre fibreglass mast and homebrew 40m dipole.  Attached to that coax was Brian’s Elecraft KX3 which I was looking forward to see how it performed as I had only ever seen one previously.

Band conditions were not good but we both got more that the four required contacts on 40m. Brian tried 20m as we “may” have been able to get a contact into VK/ZL from this summit however we were too late for long path and too soon for short path – perhaps from the next summit?

 The weather was cold but dry at Berndorfer Buchet.

The Activation (Peissenberg):

After the drive, we arrived at Peissenberg at about 11:30 UTC (about right for a short path contact into VK/ZL if propagation allowed us). Well, after walking from the car park in sunshine to my standard station location – two benches alongside the church which sits right on the summit and starting to set up the antenna mast, Brian and I spotted some storms in the distance to the west. Within minutes, the winds (over 70 km/h) and sleet / snow hit us (see pictures and linked video below). Brian asked if we should wait for it to pass but as we had planned to take lunch at the restaurant which is also on the summit, we decided to pack up what had been unpacked, drop it all back into the car and head to the restaurant by which time we were covered in ice from head to toe. After sitting down at a window and looking out at the tables that were covered in snow outside, suddenly the sun came out and the storm had passed. As we were already seated, we of course stayed and had lunch to warm us up a little as well.

Once lunch was completed, it was back to the car, grab just my gear (20 watt Xiegu X108G, 6m mast and SOTABeams linked dipole) as we decided to use my gear on this summit and then we went back to the two benches by the church. After setting up the weather conditions were certainly better with a little sunshine. The radio conditions had not improved much however we did get a minor pile-up from this summit and Brian and I easily got the required contacts to qualify the summit. As opposed to the first summit, this 1 point summit came with 3 winter bonus points and I think we earned them!

Just as we had decided to pack up so that we’d have time for the third summit, another storm approached and hit just as we got back to the car with all the gear. We wondered whether, with the high winds we were feeling, the cable car up to Laber would be running but the only way to find out was to go there and see. So the Navi (GPS) was set and off we drove.

The Activation (Laber):

On arriving at the car park for the Laber cable car, we could see it was running and when we asked, the operator said they had not had any bad weather so far today. It had been a nice sunny calm day.

The ride up in the oldest cable car system in Germany went without any issues. This system has just 4 cars on a fixed cable that means that when one car is at the bottom, two are at the half way point and one is at the top. So the cable car always stops at half way up and half way down to allow people to get out of and into the cars at the top and the bottom.

On arriving on the summit, we were greeted by sunshine and great views down into the valley but cold temperatures. The place where I usually set-up was not available as it was covered in snow and restricted from access as it was the top of a ski run. We took a look at the roof platform with the microwave links and cell repeaters on it but settled on the luxury of using the outside tables at the restaurant. This whole area is well within the AZ so there are no problems.

For this summit I had brought along my Komunica Power HF Pro 2 loaded whip and a small tripod as I know in my usual position it can be difficult to get a dipole out. With locating on the restaurant’s balcony however it isn’t difficult and so Brian agreed to put his mast and antenna up and again we used the KX-3.

So the weather conditions are good, if still a little cool, but what are the band conditions like? Horrible! It was a real fight to get the needed 4 contacts but we eventually did and as the last one was made the sleet started again. It seems our friendly snow storm had followed us down from Peissenberg! Once packed up it was time for a quick warm drink in the restaurant before getting the cable car back down the mountain. At first we thought we had missed one car and would have to wait for the next one in 15 minutes but no, we were lucky, the operator held the car and let us get in with 4 other people. The car rocked a little on the way down as the winds increased again but we safely reached the bottom and then it was time to head back to Tutzing for Brian to catch a train back to Munich. What had seemed to be a day with lots of time had shot by and I arrived home about an hour later than I had expected on the original plans but we’d managed to activate three different summit in the one day, which was quite good.

Photos (Berndorfer Buchet):

This slideshow requires JavaScript.

Photos (Peissenberg):

This slideshow requires JavaScript.

VIDEO – Peissenberg on Youtube here.

Photos (Laber):

This slideshow requires JavaScript.

Equipment used:

Berndorfer Buchet:

  • Surveyors Tripod
  • Brian’s Elecraft KX3 and battery box
  • Brian’s 40m dipole and 6m mast
  • Plastic painters sheet.

Peissenberg:

  • Xiegu X108G.
  • Battery box (2 x 5000maH hardcase LIPOs).
  • SOTABeams linked dipole.
  • 6 metre lambdahalbe fibreglass portable mast.
  • Thick plastic painters sheet.
  • Smartphone PocketRxTx App and USB cable.

Laber:

  • Brian’s Elecraft KX3 and battery box
  • Brian’s 40m dipole and 6m mast

Log (Berndorfer Buchet):

Log (Peissenberg):

Log (Laber):

Conclusions:

The propagation again wasn’t great but the weather was worse!

All in all a good if challenging, day out where we managed the three planned summits in the end.

I was able to compare the KX3 with the Xiegu albeit on different summits. I think the extra “punch” of 20+W from the Xiegu makes a difference over the 10W from Brian’s KX3. Both rigs are not easy to hear though the built-in loudspeakers and are better with headphones.

73 ’til the next Summit!

Advertisements